|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
VOLTAGE RANGE 50 to 1000 Volts CURRENT 0.5 Ampere FEATURES * * * * * * * Surge overload rating - 30 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 0.5 gram SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER MD1S THRU MD7S MD-S MECHANICAL DATA MD 0.028(0.9) 0.020(0.5) 0.108(2.74) 0.092(2.34) 0.193(4.9) 0.177(4.5) .004(0.10) MAX. 2.756(7.0) 0.260(6.6) 0.157(4.0) 0.106(2.7) 0.091(2.3) 0.193(4.9) 0.177(4.5) * Epoxy: Device has UL flammability classification 94V-O * UL listed under the recognized component directory, file #E94233. 1 2 3 4 0.157(4.0) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 40 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage Drop per Bridge Element at 0.5A DC Maximum Reverse Current at Rated DC Blocking Voltage per element @T A = 25 C @T A = 125 o C o o SYMBOL VRRM VRMS VDC IO I FSM R qJA RqJL TJ,TSTG MD1S 50 35 50 MD2S 100 70 100 MD3S 200 140 200 MD4S 400 280 400 0.5 30 85 20 -55 to + 150 MD5S 600 420 600 MD6S 800 560 800 0.145(3.6) 0.014(0.35) 0.006(0.15) MD7S 1000 700 1000 0.152(3.6) UNITS Volts Volts Volts Amps Amps C/W 0 0 C SYMBOL VF IR MD1S MD2S MD3S MD4S 1.05 5.0 0.5 MD5S MD6S MD7S UNITS Volts mAmps mAmps 2007-08 Note: 1."Fully ROHS compliant","100% Sn plating(Pb-free). 2. Thermal Resistance: PCB mounted. RATING AND CHARACTERISTICS CURVES ( MD1S THRU MD7S ) 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 0 2 4 6 INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) 60 10 1 0.1 T J = 25 OC Pulse Width = 300mS 1% Duty Cycle 10 20 40 60 100 0.01 0 0.5 1.0 1.5 2.0 2.5 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS REVERSE CURRENT, (uA) 100 FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TA = 25 OC 1.5 AVERAGE FORWARD CURRENT, (A) FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.0 10 1.0 0.5 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.1 0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 150 PERCENT RATED PEAK REVERSE VOLTAGE, (%) AMBIENT TEMPERATURE, (OC) FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE Mounting Pad Layout .276 Max. (7.0 Max.) .105 (2.67) .095 (2.41) .035 Min. (0.90 Min.) .030 Min. (0.76 Min.) Dimensions in inches and (millimeters) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. |
Price & Availability of MD4S-W |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |